Call 08046038377 79% Response Rate

Send Enquiry

our range

Sand Blasting & Shot Blasting Abrasives

Industy Leader of Sand Blastng Abrasives from Jaipur ,Rajasthan , and we have sucessfully established ourself as brand in Sand Blasting in Middle East and Arab countries ,
  • Copper Slag for sand blasting
  • Copper Slag for sand blasting
  • Copper Slag for sand blasting
  • Copper Slag for sand blasting
Copper Slag for sand blasting

Copper Slag for sand blasting

Rs 5,000  / TonneGet Best Price

Product Brochure

ColorBlack
Specific Gravity3.8
Grain ShapeAngular
Hardness7 Mohs
Packing Size50 Kg
Bulk Density135 lb/ft3

Copper slag is produced from metallurgical slags and provides fast blast-cleaning rates. Three grades are available to suit most common blasting operations. The hardness and high density of Kedia slag give it a high resistance to fracture with very low dust formation during blasting, as well as faster blast-cleaning speed when compared to local slag abrasives. This abrasive is commonly used for restoration of heavily painted steel bridges, ships and water towers.


Copper slag is a disposable high-density blasting slag made from a by-product of copper production. Kedia slag distinguishes from light-weight blasting slag, due to its high density property.


Typically, the majority of its composition is iron oxide and silicon dioxide, formed when molten slag is quenched in cold water. This cooling process fractures the slag into coarse and angular particles, making it an ideal blasting slag with optimal blasting properties.

Advantages Of Kedia – Copper Slag:
  • Very high cleaning speed
  • Very low dust level
  • Lower abrasive consumption
  • Recyclable
  • Crystalline silica levels are less than 1%

“In some cases, the reduction in dust has been at least 70%… The productivity increase has been in the area of 60% faster…” Pedro , Martapad International , Barcelona , Spain

  • Reduces slag consumption rate
  • Increases blasting productivity rate


Available Sizes and Profiles
SizeProfile
#EG 12 – provides 3.5-5.0 Mil profile Heavy-duty size for the removal of thick, tough old paint, heavy rust from ships, bridges, tanks, rail cars, etc., and for achieving a coarse profile
#EG 14 – provides 2.8-4.0 Mil profile All-purpose size for cleaning structural steel, bridges, tanks, ships, water towers, etc.
#EG 20 – provides 1.5-3.0 Mil profile Utility size for the removal of light rust, paint and mill scale

How does – Copper Slag perform?*
Cleaning rate: 295-360 ft2/hour
Consumption: 4.10-7.35 lb/ft2


*Based on internal tests. Rates vary based on blasting pressure and nozzle size.

Technical Specifications
SymbolNamrPercentage
Fe2O3 (Iron Oxide) 53-60%
SiO2 (total) (Silicon Dioxide) 32-37%
AL2O3 (Aluminum Oxide) 3-6%
CaO (Calcium Oxide) 1-3%
MgO (Magnesium Oxide) 1-2%
Zn (Zinc) <1.0%
SiO2 (Silica, Crystalline Quartz) <1.0%
LOI (Loss on Ignition) < 0.01%

Characteristics
Colour: Black
Bulk Density: 135 lb/ft3
Specific Gravity: 3.8
Grain Shape: Angular
Solubility: Insoluble
Hardness: 7 Mohs (see our hardness index)

Packaging Details:
  • 50 kg HDEP Plastic Bags
  • 1Ton Jumbo Bags


Additional Information:

  • Item Code: 26
  • Production Capacity: 500 Tons per month
  • Delivery Time: 4 days
  • Packaging Details: 50 kg and 1 ton JUMBO BAGS

View Complete details

get quote request a call back
  • Washed Garnet Abrasive
  • Washed Garnet Abrasive
  • Washed Garnet Abrasive
  • Washed Garnet Abrasive
  • Washed Garnet Abrasive
  • Washed Garnet Abrasive
  • Washed Garnet Abrasive
Washed Garnet Abrasive

Washed Garnet Abrasive

Rs 21  / KgGet Best Price

Product Brochure

Packaging Size25 kg
Packaging TypeSack
Size20-40, 30-60, 50-80, 80-120 mesh
Usage/Applicationsand blasting, water jet cutting, coating, filter
Country of OriginMade in India
GARNET SAND

Garnet is a natural minerals and not a by products of a chemical process. It is inert and non-toxic and virtually free of silica, thus excluding any danger whatsoever of silicosis hazard. Garnet has a very low dust emission.

This makes it safe for the operator , does not pollute the atmosphere and causes minimum disturbance in the vicinity and adjoin ingare as . In consequence the use of natural garnet as an abrasive has won a worldwide approval among occupational health authorities.

KEY FEATURES AND BENEFITS :

  • High specific gravity allows unique filter design
  • In combination with other filter medias, higher flow rates, higher loading and better filtration can be achieved.
  • High hardness reduces attrition and provides for years of reliable service
  • An excellent support bed for other high density medias

PHYSICAL CHARACTERISTICS :

Color

reddish

Bulk Density

120 – 150 lbs./cu. ft

Specific Gravity

4.0 - 4.1

Effective Size

.20 – 2.5 mm

Uniformity Coefficienty

2.2

Mesh Size

#8 - #80

Hardness

7.8 – 8.0 (Mohs scale)

OPERATIONAL SPECIFICATIONS :

Bed depth

3 – 5 in

Freeboard

40 – 50% of bed depth (min.)

Service flow rate

3 – 5 gpm/sq. ft.

Backwash flow rate

15 – 20 gpm/sq. ft

Backwash expansion rate

30% of the bed depth

View Complete details

get quote request a call back
  • Garnet Sand 80 Mesh Waterjet Cutting  (Washed)
  • Garnet Sand 80 Mesh Waterjet Cutting  (Washed)
  • Garnet Sand 80 Mesh Waterjet Cutting  (Washed)
  • Garnet Sand 80 Mesh Waterjet Cutting  (Washed)
  • Garnet Sand 80 Mesh Waterjet Cutting  (Washed)
Garnet Sand 80 Mesh Waterjet Cutting  (Washed)

Garnet Sand 80 Mesh Waterjet Cutting (Washed)

Rs 21,000  / TonneGet Best Price
FormGranules
Mesh size80 Mesh
Packaging detail25 Kg Bag
ColourBrown
Usage/applicationwater filtration, sand blasting, making of sand paper
Grain shaperounded
Bulk Densityca. 1,9 - 2,2 g/cm3
Hardnessca. 7,5 - 8 mohs
Specific Gravityca. 3,5 - 4,3 g/cm3
Melting Pointca. 1.300 DegreeC
Country of OriginMade in India

Garnet Sand price in India

 

Packaging detail

Price

1 Kg Bag

Rs 18

25 Kg Bag

Rs 440


(*GST & transportations charges to be applied)


Get Best price of 50 Kg Bag of optimum quality Garnet Sand.

We offer our clients Garnet Sand which are processed using the best grade silica & other light material and advanced formulation techniques in compliance with the set industry standards.


Garnets are a group of silicate minerals. Garnet species are found in every colour, with reddish shades most common. Garnets are nesosilicates having the general formula X3Y2(SiO4)3. The X site is usually occupied by divalent cations (Ca, Mg, Fe, Mn)2+ and the Y site by trivalent cations (Al, Fe, Cr)3+ in an octahedral/tetrahedral framework with [SiO4]4− occupying the tetrahedra.


First-aid Measures

Inhalation: Move to fresh air. If experiencing respiratory symptoms (e.g. coughing, shortness of breath, wheezing), call a Poison Center or doctor. 

Skin Contact: Wash gently and thoroughly with lukewarm, gently flowing water and mild soap for 5 minutes. 

Eye Contact: Immediately rinse the contaminated eye(s) with lukewarm, gently flowing water for 15-20 minutes, while holding the eyelid(s) open. If eye irritation persists, get medical advice/attention.

Ingestion: Never give anything by mouth if the victim is rapidly losing consciousness, or is unconscious or convulsing. Do not induce vomiting. Call a Poison Center or doctor if you feel ill.


Ecological Information

Although this product is not classified as an environmentally hazardous material, large or frequent spills may cause potential problems. 

Persistence and Degradability- No ingredient of this product or its degradation products is known to be highly persistent. 

Bioaccumulative Potential- This product or its degradation products are not known to bioaccumulate. 

Mobility in Soil- If released into the environment, this product does not move through the soil.


Handling Storage 

Precautions for Safe Handling: Avoid generating dusts. Wear personal protective equipment to avoid direct contact with this chemical. 

Conditions for Safe Storage: Store in an area that is ‘dry’.



Additional Information:

  • Production Capacity: 100 tons per month

View Complete details

get quote request a call back
  • Garnet Sands 80 Mesh
  • Garnet Sands 80 Mesh
  • Garnet Sands 80 Mesh
  • Garnet Sands 80 Mesh
Garnet Sands 80 Mesh

Garnet Sands 80 Mesh

Rs 18,500  / TonGet Best Price
FormGranules
Mesh size20/40 mesh
Packaging detail25 Kg Bag
ColourRed
Usage/applicationmaking of sand paper
Brandkedia minerals
Grain shaperounded
"Kedia Minerals"are processor and supplier of Garnet Sand, Abrasives Granules, Bentonite Powder, Mica Flakes and Powder, Quartz Sand, Barites Powder, Steel Shot, ect.

Additional Information:

  • Delivery Time: 2 days
  • Packaging Details: bags

View Complete details

get quote request a call back
  • Brown Aluminium Oxide - Al203 85 %
  • Brown Aluminium Oxide - Al203 85 %
  • Brown Aluminium Oxide - Al203 85 %
  • Brown Aluminium Oxide - Al203 85 %
Brown Aluminium Oxide - Al203 85 %

Brown Aluminium Oxide - Al203 85 %

Rs 50  / KgGet Best Price
BrandKedia
ColorBrown
Packing Size50 Kg
Main MaterialAluminium Oxide
Packing TypeHDPE Bag
we offer secondary grade BFA which is suitable for sand blasting , and lower quality resin,.grinding ,cutting wheels 

Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

View Complete details

get quote request a call back
  • Garnet Sand 20 40
  • Garnet Sand 20 40
  • Garnet Sand 20 40
Garnet Sand 20 40

Garnet Sand 20 40

Rs 19,000  / TonneGet Best Price
FormGranules
Mesh size20/40 mesh
Packaging detail25 Kg Bag
ColourRed
Usage/applicationsand blasting, making of sand paper, water filtration
Grain shapeangular
"Kedia Minerals"are processor and supplier of Garnet Sand, Abrasives Granules, Bentonite Powder, Mica Flakes and Powder, Quartz Sand, Barites Powder, Steel Shot, ect.

View Complete details

get quote request a call back
  • Brown Fused Alumina Oxide F-60
  • Brown Fused Alumina Oxide F-60
  • Brown Fused Alumina Oxide F-60
  • Brown Fused Alumina Oxide F-60
Brown Fused Alumina Oxide F-60

Brown Fused Alumina Oxide F-60

Rs 90  / KgGet Best Price
ColorBROWN
Materialalumina
brandkedia
statepowder
Country of OriginMade in India
"Kedia Minerals"are processor and supplier of Garnet Sand, Abrasives Granules, Bentonite Powder, Mica Flakes and Powder, Quartz Sand, Barites Powder, Steel Shot,BFA ect.

View Complete details

get quote request a call back
  • White Aluminum Oxide
  • White Aluminum Oxide
  • White Aluminum Oxide
  • White Aluminum Oxide
  • White Aluminum Oxide
White Aluminum Oxide

White Aluminum Oxide

Rs 88  / KgGet Best Price
Colorwhite
MaterialAluminium
Formpowder
ProviderKedia minerala
Country of OriginMade in India
White fused alumina is made of high-purity low-sodium alumina by melting at the high temperature, cooling crystallization, and then crushing. The white fused aluminum oxide powder is under strict controlling to keep the grain size distribution and the consistent appearance.

View Complete details

get quote request a call back
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
  • Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)
Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)

Imported Brown Fused Alumina Al203 95 % min ( F-46, F-36 F60)

Rs 92  / KgGet Best Price

Minimum Order Quantity: 100 Kg

ColorBrown
MaterialBrown fused Alumina
Purity96 % Al203
Usage/ApplicationSand Blasting / Wheel Grinding
Pack Size25 kg , 50 kg , 1 ton
Brown fused alumina is fused and crystalized at high tempreture based on a mixture of bauxite and other materials. It is characterized by its high hardness, good toughness and sharp shapein size. Abrasives tools made of it are suitable for grindind metals of high-tensile strength such as carbon steel, general-purpose alloy steel, annealed malleable iron and hard bronze,etc. it also can be used as refractory materials.


Product Paramenters
ColorBrown
Mosh hardness9.0
Melting point2250
The maximum temperature1900
Specific gravity3.6-3.9g/cm3
Bulk density1.53-1.99g/cm3
Real density3.90g/cm3


Additional Information:

  • Production Capacity: 25 tons

View Complete details

get quote request a call back
  • Abrasive Garnet 20 40 Mesh
  • Abrasive Garnet 20 40 Mesh
  • Abrasive Garnet 20 40 Mesh
Abrasive Garnet 20 40 Mesh

Abrasive Garnet 20 40 Mesh

Rs 19,000  / TonneGet Best Price
Packaging Size25 kg
Packaging TypeBag
ColorRed
Size20-40 MESH
Country of OriginMade in India

The advantages of using this garnet sand over other types of abrasive blasting materials include its high hardness, excellent durability, and low dust production. It is also non-toxic, non-reactive, and chemically inert, making it a safe and environmentally friendly option for sandblasting operations.

Garnet Sandblasting Grit is available in a range of sizes and shapes, from fine powders to coarse grains, depending on the specific application. Its sharp edges and abrasive properties make it ideal for cutting and polishing metals, stones, and other hard materials.In summary, Garnet Sand for Sandblasting 20-40 Mesh is an effective and efficient abrasive blasting material that offers numerous advantages over other types of abrasives. Its high durability, low dust production, and chemical inertness make it ideal for industrial cleaning and surface preparation applications.

View Complete details

get quote request a call back
  • Pink Aluminum Oxide
  • Pink Aluminum Oxide
Pink Aluminum Oxide

Pink Aluminum Oxide

Rs 135  / KgGet Best Price
MaterialPINK FUSED ALUMINA
ColorPINK
Density1.75-1.95g/cm3
Melting Point2250
Packaging Size25KG, 50KG, 1 TON
Specific Gravity3.95g/cm3
Usage/ApplicationAbrasives/Refractory,castable,blasting,grinding,lapping ,polishing
Pink alumium oxide is electrically fused in high temperature ,being added with the right quantity of oxidized chromium , it is pink and its hardness is close to white fused alumina, but its toughness is higher than white fused aluminium oxide 

View Complete details

get quote request a call back
  • Stainless Steel Shot
  • Stainless Steel Shot
  • Stainless Steel Shot
  • Stainless Steel Shot
Stainless Steel Shot

Stainless Steel Shot

Price on Request

Product Brochure

MaterialSteel
Grain Size1-3 mm
Packing TypeHDPE Bag
Packing Size25 Kg
Country of OriginMade in India

To cater to the various needs of our valued customers, we are able to supply and export high quality Steel Shot. These products are manufactured by our qualified professionals from premium quality steel, obtained from the authorized vendors of the market. The shots we offer are mostly used in airless blast machines, which are used to clean foundry castings, surface polishing and shot peening. Being, dimensionally accurate and non-corrosive, the Steel Shot is widely demanded in the market.

Kedia Steel Shot Blasting Service is the ideal cleaning process prior to forming, shearing, rolling, painting or galvanizing. Shot Blasting uses fine steel media to clean, descale and remove rust from parts. Parts are "sprayed" with a shot, similar to sandblasting, revealing the original bright metallic appearance. The restored surface has a uniform lustre, optimized for lube adhesion.
Other Details of Steel Shot :

  • Manufactured hypereutectoid steel abrasive
  • Grey, metal spheres
  • Also used in portable trackblast airless wheel blast machines for concrete floor preparation and profiling
  • Very long lasting
  • Can be recycled many times
Technical Specification

Size

Customized

Shape

Spherical

Material

Metal

Surface

Galvanized

Application

Clean Foundry Castings

Colour

Grey

Shot-Blasting Media For All Applications:

· Cast steel shot

· Cast steel grit

· Chilled cast iron shot

· Chilled cast iron grit

· Cut wire shot

· Aluminium oxide grit

· Glass bead Copper slag Garnet

Industrial Applications

Cleaning

Steel shot and grit are used in cleaning applications for removal of loose material on metal surfaces. This type of cleaning is common in automotive industry (motor blocks, cylinder heads, etc.).

Surface preparation

Steel shot and grit are used in surface preparation process for cleaning metal surfaces which are covered with mill scale, dirt, rust, or paint coatings and for physically modifying the metal surface such as creating roughness for better application of paint and coating. The steel shots are generally employed in shot blasting machines.

Stone cutting

Steel grit is used in cutting hard stones, such as granite. The grit is used in large multi-blade frames which cut the blocks of granite into thin slices.

Shot peening

Shot peening is the repeated striking of a metal surface by hard shot particles. These multiple impacts produce a deformation on the metal surface but also improve the durability of the metal part. 

Industrial Uses : Steel shot and grit address numerous sectors since cleaning, surface preparation or shot peening applications are used by many industries as a part of their construction, renovation or repair processes. The main industrial sectors employing steel abrasives are:

(1)   Automotive Industry   (2)   Construction

(3)   Metallurgy                      (4) Petrochemical Industry

View Complete details

get quote request a call back
  • Brown Fused Alumina Bfa F-120
  • Brown Fused Alumina Bfa F-120
  • Brown Fused Alumina Bfa F-120
  • Brown Fused Alumina Bfa F-120
  • Brown Fused Alumina Bfa F-120
Brown Fused Alumina Bfa F-120

Brown Fused Alumina Bfa F-120

Price on Request

Product Brochure

ColorBROWN
MaterialAlumina
Formpowder
brandkedia
Country of OriginMade in India
"Kedia Minerals"are processor and supplier of Garnet Sand, Abrasives Granules, Bentonite Powder, Mica Flakes and Powder, Quartz Sand, Barites Powder, Steel Shot,BFA ect.

View Complete details

get quote request a call back
  • BROWN FUSED ALUMINA 1 -3 MM
  • BROWN FUSED ALUMINA 1 -3 MM
  • BROWN FUSED ALUMINA 1 -3 MM
BROWN FUSED ALUMINA 1 -3 MM

BROWN FUSED ALUMINA 1 -3 MM

Rs 85  / KgGet Best Price

Product Brochure

Description:

Aluminum Oxide is manufactured in an electric arc furnace that produces an extremely tough, long-lasting grain which is graded to exacting standards. The various macrogrit sizes may be used for all types of bonded abrasive and general industrial applications.

Applications:

It is particularly useful for rough grinding, deburring, snagging and cutting of low-alloy, ferrous materials. Silane coating to improve wet strength in resin wheels is available. Iron Oxide (red coat) is available to increase bonding strength.

Typical Chemical Analysis:

Aluminum Oxide (Al2O3) 96.13%
Titanium Dioxide (TiO2) 2.21%
Silicon Dioxide (SiO2) 1.03%
Iron Oxide (Fe2O3) 0.22%
Others (MgO, CaO, Cr2O3) 0.41%

Physical Characteristics:

Crystal Form: Alpha-Alumina
True Density: 3.95 g/cm3
Hardness: Knoop (100) 2050 kg/mm, Mohs 9.0
Melting Point: 2000°C
Color: Brown – Tan

 

 

Bulk Density (g/cm3):

Grit BD Grit BD
8 2.03 – 2.13 60 1.74 – 1.88
10 1.97 – 2.12 70 1.72 – 1.86
12 1.94 – 2.09 80 1.71 – 1.85
14 1.92 – 2.07 90 1.67 – 1.81
16 1.90 – 2.05 100 1.64 – 1.78
20 1.87 – 2.03 120 1.63 – 1.77
24 1.85 – 1.99 150 1.62 – 1.76
30 1.81 – 1.95 180 1.60 – 1.74
36 1.79 – 1.93 220 1.58 – 1.72
46 1.77 – 1.91 240 1.56 – 1.70
54 1.76 – 1.90

 

 

Grain Size Distribution :

Upon ANSI B74.12-2001, FEPA-Standard 42-1:2006 or ISO 8486-1

 

Packing:

20 Kg/25Kg Paper bags, 25 Kg PP bags,50 Lbs Paper bags, 2000lbs Jumbo,1MT Jumbo Bags etc

View Complete details

get quote request a call back
  • BROWN FUSED ALUMINA OXIDE BFA F-24
  • BROWN FUSED ALUMINA OXIDE BFA F-24
  • BROWN FUSED ALUMINA OXIDE BFA F-24
  • BROWN FUSED ALUMINA OXIDE BFA F-24
BROWN FUSED ALUMINA OXIDE BFA F-24

BROWN FUSED ALUMINA OXIDE BFA F-24

Rs 90  / KgGet Best Price

Product Brochure

ColorBROWN
Purity95-96%
Pack Size25, 50 Kg Bags

View Complete details

get quote request a call back
  • Imported White Fused Alumina Al203 Min  99.25% , (Size available  F-24 to F200)
  • Imported White Fused Alumina Al203 Min  99.25% , (Size available  F-24 to F200)
Imported White Fused Alumina Al203 Min  99.25% , (Size available  F-24 to F200)

Imported White Fused Alumina Al203 Min 99.25% , (Size available F-24 to F200)

Rs 90  / KgGet Best Price
ColorWhite
Usage/ApplicationIndustrial
Packaging TypeBags
FormGranules
Country of OriginMade in India
We offer imported White fused alumina oxide from china , having   White Aluminium Oxide is made from high quality alumina by melting above 2000 degree , in the electric arc furance , 

 
comapred with BFA , its hardness is higher and toughness is lower

View Complete details

get quote request a call back
  • PS Balls Abrasive
  • PS Balls Abrasive
  • PS Balls Abrasive
  • PS Balls Abrasive
PS Balls Abrasive

PS Balls Abrasive

Rs 15,000  / TonneGet Best Price

Product Brochure

Packaging Size1 ton and 25 kg
ColorBlack
Stategrains
Hardness7.5 mohs
Type Of Cuttingsand blasting
Fe2O343.5%
SiO219.5%
Specific Gravity3.45-3.82
Density3.64 g/cm3
Iron Granular(PS Ball) made of an atomizing, liquid steel slag using SAT, Slag Atomizing Technology. Fast heat exchange of the falling down liquid steel to a high speed airflow convert liquid steel slag stream into spherical slag balls at various sizes.

PS Ball – Because of its characteristic, it provides a perfect atomizing of materials size, density, hardness and durability. Hence, the efficiency of abrasive reduces the consumption rate and increases the productivity as well as non-toxic environment status. PS Ball is an inexpensive material when we compared to other mineral materials. PS Ball can be recycled up to 3-4 times based on its surface toughness.


Uses:

Today, PS Ball is utilized for the valuable material in various industrial fields as described below.

1. Abrasive Blasting Material

2. Weight Material

3. Filter Media

4. Roofing Granules

5. Casting Sand

6. Permeable Reactive Material

7.OtherConcrete Products

8. Reinforcement Material

9. Sand-pile Material

10. Poly-concrete Material

11.Road-Pavement Material

12. Non-slip Material


Chemical Analysis Report

Elements

IN %

SiO2

19.5%

Al2O33

4.25%

Fe2O3

43.5%

MgO

2.72 %

CaO

30 %


Physical Parameters

Parameters

Typical

Specific Gravity

3.45 – 3.82

Hardness

7.5 mohs

Density

3.64 g/cm3

Illumination

Very good

Reusability

yes

Waste Apply

General

Facility Charge

Easy



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES